Transformers
35kV dry-type power transformer
Product Introduction
This product is a power transformer with high electrical strength, mechanical strength and heat resistance. It has the advantages of fire prevention and flame retardant, environmental protection, penetration into load center, low installation cost and simple maintenance, and can be widely used in high-rise buildings, airports, power stations, commercial centers, urban power grid reconstruction and other important places.
Product Model
Product Features
The coil adopts vacuum pressure mirror casting technology, which has beautiful appearance and strong short-circuit resistance. The core is made of high-quality silicon steel sheet with 45 fully inclined multi-level joints, with high lamination coefficient, low no-load loss, low noise, low partial discharge, good thermal stability, low noise and strong overload capacity. The product is widely used in commercial buildings and load center areas.
Applicable Conditions
1. Voltage level: 35kV(36.5kV, 38.5kV, etc.);
2. Tap range: ±2× 2.5%,±5%;
3. Connection groups: Dyn11, Yd11, YNd11, etc.
4. Capacity range: 800 ~ 25,000 kva;
5. Insulation level: 35kV LI170AC 70 and 10kV LI75AC35；;
6. Insulation grade: F or H;
7. Voltage regulation mode: no excitation voltage regulation or on-load voltage regulation;
* Please consult with our company when it is used beyond the above-mentioned conditions.
Technical Parameter
